Home
Search results “Output signals mach3”
MACH 3 CNC  CONTROL SOFTWARE TUTORIAL 4 INPUTS & OUTPUTS
 
19:17
www.makecnc.com the CNC hobbyists home on the web presents this indepth Tutorial on setting up MACH 3 the 6 AXIS CNC step and direction motor control software used to control your CNC machine from a windows based computer please visit our website for more information and to purchase this user freindly and powerful CNC software
Views: 122932 makeCNC Workshops
Mach 3 Output Setup
 
04:01
Setting up an output in Mach 3
Views: 6310 gomiddlemas
Mach3 CNC Controller, Inputs / Outputs
 
19:21
Mach3 CNC Controller, Inputs / Outputs
Views: 11859 QSPSB
MACH3 how to connect peripheral equipment
 
17:20
Video showing how to connect and aux. equipment to a break-out-board and relay board, and a small macro in MACH3. To turn on/off a solenoid valve.
Views: 7813 Bo Andersen
Mach3 Features You May Not Know You Have...
 
22:11
This video covers two features you may not have even known you had.The Maintenance tracker in Mach3, and Debounce settings which will provide you the most stable system possible through adding a defined type to wait for a switch signal to be valid. The Debounce feature is an amazing feature for troubleshooting, and also for even stable systems as added security with stability. If you have an questions, or require a quote please contact me at [email protected] , or through my eBay store here https://www.ebay.com/str/edealersdirect
Views: 3150 corvetteguy50
MACH3 TURN EASY TACH INPUT
 
06:33
Links for Tach below: Here is a Recap video I pieced together. I have had a lot of questions on Mach3 turn threading and the input Tach. signal. In this video I talk about the tach used and how I wired it so i could use this tach signal to input into Mach3. I have tried to be as detailed as possible to the point of being informative but not boring. I will try to keep the videos around the 15 minute mark. Please comment and let me know if the content is spot on or you would like more information and details. Thanks for watching , please subscribe, thumbs up if you like the video, and most importantly , Be Safe! Follow me on INSTAGRAM : https://www.instagram.com/cnc4xr7/?hl=en Show support with a pledge: https://www.patreon.com/CNC4XR7 For Plans and other Information visit https://www.cnc4xr7.com Follow the PM-727M CNC Build Here: https://www.youtube.com/playlist?list=PLZ7eWN_JLWbFQUbI2_wPy8E24P3itDdS6 Follow My G0602 Build Here: https://www.youtube.com/watch?v=xQhZr6-C0yc&list=PLZ7eWN_JLWbF9f1nIc4cWsV3L5I9vu7vx Folllow My X2 Conversion here: https://www.youtube.com/watch?v=yvV9ViInNtw&list=PLZ7eWN_JLWbFqRQmUOhze6X2XXtiRn-xL Tach Used: https://www.ebay.com/itm/4-Digital-Green-LED-Tachometer-RPM-Speed-Meter-Hall-Proximity-Switch-Sensor-NPN/171846091886?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649 Link to Mach3 Turn Threading Test: https://www.machsupport.com/wp-content/uploads/2013/02/Mach3_Threading.pdf Disclaimer. I am not a professional. My videos are intended to document my progress . I express no warranty as to the accuracy reliability or safety of the information provided here. By using any of the information provided in this video you acknowledge that I am not responsible or liable for injury or damage to property. Electricity is Dangerous proceed with caution follow all local regulations in your area.
Views: 1439 CNC4XR7
The Secret to C6 Board Spindle Control - CNC4PC
 
11:38
Since making this video, I have developed my own board to convert the PWM signal to an analog signal that is usable for most mills and lathes. It can be purchased here: http://www.rivalmachining.com/product/pwm-to-voltage-spindle-speed-controller/ or Circuit Board only: https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338261357&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F302891634972 Circuit Board with Power Supply: https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338261357&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F302891637812 Circuit Board with Power Pigtail: https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338261357&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F302891639439 I wasn't getting an output signal from the CNC4PC C6 Variable Speed Control Board until I realized my input signal wasn't strong enough. A transistor fixed the problem! If you need something made, please contact me at: http://www.rivalmachining.com/contact/ https://www.facebook.com/RivalMachining/ Link to my Mini Mill CNC setup video: https://youtu.be/fPoP4r03Y1I Link to wiring schematic and .HAL file: http://www.rivalmachining.com/machine-shop/ Link to CNC4PC C6 Board: https://cnc4pc.com/c6-variable-speed-control-board.html
Views: 1068 Rival Machining
Mach4 How to make a screen button activate an Output Signal
 
04:03
Mach4 Tutorial. How to make an button activate an output signal.
Views: 2177 Stig Ove Ruud
Mach3 Breakoutboard STB5100 test
 
05:16
Mach3 Breakoutboard test USB Type STB5100 5 Axis motor 5 Input signal 4 Output signal Spindle ON/OFF & PWM or V Speed Control USB Interface
Views: 858 TODORO
Mach3 signal Test
 
05:33
การทดสอบสัญญานควบคุม ของ Mach3 CNC Controller
Views: 1754 PanmaneeCNC
Slow Engraving for Mach3 TOMTOM Plugin  / Expand  the Laser signal!
 
01:45
ロジックICを使って、レーザーのON/OFF信号を、伸張しました。 これで、Feedrateを遅くしてもパワーを維持して、彫刻ができます。 Size: 70mm×70mm Feedrate: 3500mm/min Pitch: 0.15mm PWM: 35%
Views: 1611 Tomura Kazuki
Mach3, Spindle relay setup
 
02:26
Showing the Settings you need to do for Spindel output in mach3. So you can turn on a relay with the M03 command (Spindle CW ON)
Views: 33425 Bo Andersen
PWM setup mach3   YouTube
 
02:15
Views: 20915 Lionel HAFELI
5 AXIS BREAKOUT BOARD - MACH3 SETTINGS FOR SPINDLE RELAY AND PWM CONTROL
 
02:21
5 AXIS BREAKOUT BOARD. MACH3 TESTED SETTINGS FOR SPINDLE RELAY AND PWM CONTROL.
Views: 15151 NSA
Getting the Mach3 / C11 control the Chinese 2.2kw Spindle through VFD
 
01:23
To get the spindle turning by C11/Mach3 combination, I followed the steps below: 1. Wiring from VFD to C11 (please check the Chai's YP-C 3 pages .doc): VFD = C11 S1 = PIN 1 (NO) S2 = PIN 2 (NO) COM = VIN2 (PIN1) & VIN1 (PIN16) FU = 10V (PIN 14) COM = GND (PIN 14) 2. Set the YP-C VFD parameteres for controlling it from outside: P0000 = 1 P0001 = 1 3. In Mach3 Port & Pins, I put the following settings: a. Motor Outputs / Spindle (step pin:14, dir pin:8, step port:1, dir port:1) (didn't understand the 8 in dir pin but it worked) b. Output Signals / Enable Output 1 (port:1, pin:1), Output 2 (port:1, pin:16) and Charge Pump (port:1, pin:17) c. Spindle Setup / Relay Control / Uncheck 'Disable Spindle Relays', M3 Output 1: 1, M4 Output 2: 2 d. Spindle Setup / Motor Control / Check 'Use spindle motor output' and 'Step/Dir Motor' e. Motor tuning and Setup / Spindle / Steps Per:1000, Step Pulse:5, Dir Pulse:1 4. I fine tuned the C11 pot by setting the Step Pulse to 5 and managed to get 10.02V in multimeter, so I started the testing from Mach3 MDI screen. My testing started by typing in MDI command prompt the following: m3 s12000. I noticed that Mach3 warned me about 'Too fast for puley - Using Max' and then I noticed that the max spindle speed was set to 8000 in Mach3 main screen. So, I assumed that I had to increase this to 24000 as this is my spindle max RPM. I found a setting under Config / Spindle Pulleys and I selected the Pulley Number 5 and set it to 24000 instead of its default value (25000)
Views: 10922 kostasvgt
For Sale: Mach3 Spindle Index Sensors $30 for RPM feedback
 
04:09
[email protected] Contact me if you're interested in one of these. I accept PayPal. $30 plus $3 for shipping and handling Demonstration Video https://youtu.be/Y8NCtrCytDQ Instruction Manual: https://www.dropbox.com/sh/codqegokq126e0u/AADCvG3XbyjXj8Q0ByzbLoB5a?dl=0
Views: 821 Franco
5 Axis 50KHZ Five Axis Stepper Motor Driver Breakout Board USB MACH3
 
04:54
5 Axis 50KHZ Five Axis Stepper Motor Driver Breakout Board USB MACH3.. 1: Compatible with MACH3 2: 400KHz output step signal 3: 25 Digital signal input 4: 16 Digital signal output 5: 2 relays 6: 1 Analog signal output to spindle
Views: 9755 Maro Circuitshop
Mach3 PWM Output Controlling a CO2 Laser power
 
00:35
The output of power of the CO2 laser is controlled by the PWM output (10% to 100%) by Mach3. Output pin is #14 from the parallel port and laser mode is enable. Pay attention to the scope wave form. You may not see the level of growing on the tube but the power of the laser changed accordingly
Views: 6250 LightObject
mach3 spindle speed simulation with at89s52 and pwm output voltage on multimeter
 
01:25
mach3 spindle speed simulation with at89s52 and pwm output voltage on multimeter
Views: 1233 Sanjib Sahani
USB CNC BOX 4 Axis Stepper Motor Driver + USB Port Compatible with Mach3+BLDC Spindle Driver
 
02:31
1, 3 channel limit signal / origin signal multiplexed optocoupler isolated common digital input interface; 2, the original road signal optocoupler isolated ordinary digital input interface; 3, 400W DC brushless drive, can be accessed by 400W DC brushless spindle motor, spindle start and stop and speed can be controlled by the spindle panel or controller; 4, 4-channel stepper motor drive, single channel up to 200KHz control pulse output; 5, stepper motor driver Sanyo 128 subdivision 4A dedicated driver chip, stable performance, the default configuration for the 32 subdivision; 5, while supporting USB link; 6, equipped with hand pulse interface, support the company's digital hand pulse and digital manual control, support the standard hand pulse. 7, support panel keys single-axis manual jogging and linkage operation; 8, support the rapid designation of operating position operation;
Views: 3033 China PlcCenter
Build Your Own CNC! (Part 2) - Inputs, Outputs & Software
 
32:24
Follow-up to Part 1. Inputs, Outputs and software configuration. (Mach 4) Part 1 of this video: https://youtu.be/K0XfRPi_h2M My CNC Basics Video: https://youtu.be/YBGqknN3gGs My CNC Basics 2 Video: https://youtu.be/J4bMAIEFCYU NYC CNC: https://www.youtube.com/user/saunixcomp Titans Of CNC: https://www.youtube.com/user/titanamericanbuilt ----- Music: "Cumberland Gap" - Nat Keefe with The Bow Ties
Views: 277836 This Old Tony
Mach 3 Relay signal
 
00:07
Views: 151 Cameron Stewart
Limit Switch triggered with out input Signal in Mach 3
 
03:28
Limit Switch triggered with out input Signal in Mach 3
Views: 2009 Funny Movies
G0602 Project Flood Coolant Mach 3 settings
 
06:00
This is the 22nd video in the series as I progress through my Grizzly G0602 CNC lathe Conversion. With the CNC conversion complete it's time to concentrate on the Flood coolant. In this video I Show you how to setup Mach 3 for Flood coolant. I will try to document and illustrate the process and hopefully put out information that others may have missed. Thanks for watching , Please subscribe, and feel free to comment, Sam In the next video I will work on A QCTP ( Quick Change Tool Post) Riser Block. Disclaimer. I am not a professional. My videos are intended to document my progress . I express no warranty as to the accuracy reliability or safety of the information provided here. By using any of the information provided in this video you acknowledge that I am not responsible or liable for injury or damage to property. Electricity is Dangerous proceed with caution follow all local regulations in your area. Visit the website at www.cnc4xr7.com
Views: 2232 CNC4XR7
CNC Electronics 5 -Testing the Parellel Port.wmv
 
07:21
Patrick's Tip Jar: bitcoin:1Gtawd29Sgu5CdvfUnkRg1YBfowCawjFdH Ether:0xa962365100011B79097A7bb9DD51A53eE98266bb If you have found this video to be helpful, consider making a tip. Thanks. This is the fifth in a series on CNC electronics. In this video, I demonstrate a method of testing the parallel port to determine that software and computer parallel port interface is functioning properly. Equipment that I use to make videos: Canon EOS Rebel: http://amzn.to/2rJSeh0 Macro Lens: http://amzn.to/2qaSKmK Microphone: http://amzn.to/2qO2RB4 3D Mouse to rotate/zoom/move the object (Must have for CAD!!!): http://amzn.to/2ruFnSn The drafting pencil I use on these videos: http://amzn.to/2qioYg2 The cheap oscilloscope that I use (because it's cheap and will work all of the projects in these tutorials): http://amzn.to/2rSHnBa A better oscilloscope and the one I would recommend: http://amzn.to/2qizK5M The brand of multimeter that I use and the one I recommend: http://amzn.to/2qicUez Want to have your own Patreon campaign? https://patreon.com/invite/wpllxz -~-~~-~~~-~~-~- Please watch: "51. How to Add Interrupts for the ADC - ARM Microcontroller Part 2 - ARM STM32 Microcontroller" https://www.youtube.com/watch?v=YLqLLMHtDoc -~-~~-~~~-~~-~-
Views: 102774 Patrick Hood-Daniel
spindle at speed in Mach3 universal  best version
 
28:43
spindle at speed in Mach3 universal best version
Views: 167 zmajmr
Mach3 with Active Low relays
 
00:58
Controlling 8 channel relay board with Mach3. Including logic inverter on all channels so fail safe as relays drop out on no signal. Where Mach3 has to be running to raise the logic level to operate the relays.
Views: 780 HighlandSteam
Cài đặt toàn bộ các thông số trục chính trong Mach3
 
03:13
-Tín hiệu nối Mach3 và Breakout Board (Motor Outputs, Spindle Setup) -Tín hiệu lệnh M3 và M5 (bật và tắt động cơ: Output Signals) -Thông số điều khiển (PWM, velocity và acceleration: Motor Turning) -Vòng quay lớn nhất (Spindle Pulleys)
Views: 37 Alpha-Go
Homemade DIY CNC Series - Mach3 Axis Setup - Neo7CNC.com
 
08:01
Help support Neo7CNC: https://www.paypal.me/neo7cnc http://www.neo7cnc.com Follow me on twitter http://www.twitter.com/neo7cnc Here is the second video for the wiring and setup of Mach3. I go over the software configuration to allow the hardware that we wired up in the last video to be controlled by Mach3.
Views: 66486 Neo7CNC
testing the spindle 0-10 voltage going to vfd mach3
 
05:24
Tutorial video for checking the voltage going out to VFD to see if we have stable speed voltage.
Views: 366 Desktop CNC
Hybrid Stepper Drive: Connecting Alarm Signals to CSMIO/IP-S
 
31:31
Hybrid Stepper Drive: Connecting Alarm Signals to CSMIO/IP-S
Views: 614 zmajmr
Mach3/4 Visual Studio
 
03:29
Development Of Mach3 or Mach 4 in Visual Studio 2010 -13
Views: 6823 Jason Blake
PWM to analog 0-5v Mach 3
 
01:20
You might want to turn down the volume.
Views: 2495 Hemal Chevli
Mach4 5 Minute Tutorial: Integrate custom sensors/inputs
 
05:08
There is more to stopping a program that goes bad than just limit switches and your e-stop. Make your CNC and Mach 4 smarter by wiring up other inputs like Spindle errors, CLEARpath High Level Feedback signals, VFD errors, or anything else you like with this must know customization. If you have a custom built CNC you should watch this video and learn how to do this.
Views: 1311 Hands on CNC
Contour milling machine conversion
 
01:12
Shown is a full conversion of a Contour mill to CNC control via Mach3. The system has been upgraded with new motors on the X and Y axes. The CNC motion control products supplied by CNC drive motion controls has allowed JBEC and StoneyCNC to provide full CNC mill conversions of this type to a number of machines. If you are looking for a conversion of any machine of this type to Mach3 please don't hesitate to contact us. The system runs on the UC300 USB motion controller with the HDBB2 running as the main breakout board. The combination is feature packed. The HDBB2 comes with -Chargepump -Open drain outputs - used to fire the 12V spindle relay coil -Optoisolated inputs -The option to be used as a standalone LPT control card - The option to generate a 0-10V analogue spindle singnal from Mach3 - LED status indicators on all inputs and outputs. The UC300 USB controller allows - Extra I/O multi port expansion - Spindle DC analogue spindle output - Spindle and feed override signals - Dedicated Mach3 configurable plugin GUI
Views: 4046 Stoney CNC
MACH 3 CNC CONTROL SOFTWARE TUTORIAL 5 TROUBLESHOOTING
 
25:53
www.makecnc.com the CNC hobbyists home on the web presents this indepth Tutorial on setting up MACH 3 the 6 AXIS CNC step and direction motor control software used to control your CNC machine from a windows based computer please visit our website for more information and to purchase this user freindly and powerful CNC software
Views: 101091 makeCNC Workshops
Laser addition to CNC RouterParts 48"x96" CNC
 
04:46
Outfitted with a 10 W diode laser from EnduranceLasers.com ! Mach3 setup being tweaked currently. I will post another describing the setup and demonstrating the setup.
Fräse Frieda, Mach3, Image2Gcode, DTR SXD, Laser Engraving
 
01:26
Hello, here you see my CNC Router engraving an image. G-Code is generated with my custom "Image2Gcode" software. The image is 72.9 mm / 48.6 mm. The engraving pattern is 0.01mm. Laser Max output set to 1/2 Power, so I get A Axis movement from 0.000 to 0.0127mm. I used a Bangood 2.5W Laser. The included driver is only for static output at full power, so changed it. The Laser is driven by a DTR Laser's "Super X-Drive (SXD)" Buck Driver at 1.8Watts. That give my out round about 2.5Watts. The inbuild Diode seems to be a 2W M140 445nm Laser Diode. To get Mach3 run the Laser Power well, I wrote an Arduino Sketch that used Step/Dir to convert it to a 8-Bit PWM. Therefore I test Mach3 Spindle PWM output, but it always give me a little delay when changing the PWM by S Codes. At 0:29 you see I used the A axis to generate Step/Dir to my DAC. At 0:37 you see the Feedrate is round about 800mm/min. At 0:52 you see DTR Laser's "Super X-Drive (SXD)" Buck Driver. At 1:11 you see the Arduino Uno Regards Toby
Views: 1290 Tobias Tetzlaff
CNC control panel Final version Black
 
02:56
All done now :) All buttons now got signal and light power from Pokeys Extension boards. Only a few buttons are configured yet, so there is still a lot of work left in LUA scripts and so on. Sorry for bad filming...
Views: 2389 Stig Ove Ruud
Is your CNC router SAFE | SAFETY CHARGE PUMP
 
02:08
The Charge Pump is an essential part of every CNC system - especially a CNC router system where there is the possibility for home build or DIY CNC applications. The Charge Pump is a 12.5kHz signal that is triggered down an output pin of your CNC system. When you hit RESET on Mach3 to enable the system you trigger the charge pump. Only when Mach3 is open and the reset is triggered will the charge pump signal occur. It is not possible for the Charge Pump to be present when the PC is powering up or down as the signal must be a contstant 12.5kHz signal to be valid. The HDBB2 allows the Charge pump to be connected directly to one of its open drain output mosfets. In this way the charge pump can be used to trigger a safety relay directly as shown in the video. As the open drain output is used to provide a path to ground for the safety relay the system can also be used to prevent the entire machine from powering up without a Charge Pump signal present. If you have a 5V, 12V or 24V DC latched on/off system (Which you should have) for your CNC router which controls the main power to the machine - then connecting the return path of the circuit to the open drain output (provided its not more than 50V DC and draws less than 1A) will only allow the machine to be powered up when the charge pump signal is activated. Every CNC machine or router system must be installed with a Charge Pump!!! The charge pump prevents unexpected machine states from arising - for example - a spindle powering up when a control PC is booted up or down.
Views: 3380 Stoney CNC
CNC Mill Laser Mach3
 
08:05
Wyplanie chińskim laserem Mach3
Views: 112 Piotr Borowski
CNC to Art Video 10 - Mach 3 G-Code Verify - CNC ...
 
06:39
CNC to Art Video Series Video 10: This is the CNC Video series on how to take an image to a CNC File. This process is one that many CNC Users want to know, but there is not much info on. Here is your chance to get the inside scoop. For more information, please go to: http://www.cncinformation.com Before we head out to the shop and begin CNC Plasma Cutting, we will check out our G-Code program in Mach 3. This will give us some confidence when running our CNC Program. Mach 3 is a great CNC Control Program. It takes our G-Code and converts it into Signal for the CNC Controller. The CNC Controller then sends the signals out to either Servo Motors or Stepper Motors. These motors then move the axis to create motion.
Views: 190366 arttocnc
Mach3 Setup
 
09:30
Views: 152687 Burl Tichenor
3-axis controller & Mach3 fire up CO2 laser
 
01:45
I customized a 3axis (TB6560) stepping motor controller by allowing it to control CO2 laser with Mach3. Not sure if it works on KCam or EMC2. You can use it to do cutting or outline engraving. But it's not good for raster image engraving. Perfect for vector format cutting or engraving (manual power control needed)
Views: 13668 LightObject
TB6600 5A Stepper motor driver and Arduino
 
03:39
TB6600 5A Stepper motor driver and Arduino TB6600 arduino Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal. TB6600 arduino stepper motor driver has a wide range power input, 9~42VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors. Link download Sketch ( Can use same Tb6560 ) https://goo.gl/Q55Xnd ::::::::::: SUPPORT CHANNEL :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: Please Donate To Help Me Afford New Equipment And Software To Make My Videos More : https://goo.gl/1m8Dg2 Don't forget to subscribe!
Views: 140775 Maker Tutor
Mach3 laser test 2
 
00:14
Views: 60 Arjan Swets